manualshive.com logo in svg

WEG CFW500 V1.8X, Руководство по программированию, Страница: 29 / 172

Поделиться
Скачать
WEG CFW500 V1.8X Скачать руководство пользователя страница 29

1

Safety Instructions

CFW500 | 1-1 

1 SAFETY INSTRUCTIONS

This manual contains the information necessary for the correct setting of the frequency inverter CFW500.

It was developed to be used by people with proper technical training or qualification to operate this kind of 
equipment. These people must follow the safety instructions defined by local standards. The noncompliance with 
the safety instructions may result in death risk and/or equipment damage.

1.1 SAFETY WARNINGS IN THIS MANUAL

DANGER!

The procedures recommended in this warning have the purpose of protecting the user against death, 
serious injuries and considerable material damage. 

ATTENTION!

The procedures recommended in this warning have the purpose of avoiding material damage.

NOTE!

The information mentioned in this warning is important for the proper understanding and good 
operation of the product.

1.2 SAFETY WARNINGS IN THE PRODUCT

The following symbols are fixed to the product, as a safety warning:

High voltages present.

Components sensitive to electrostatic discharge.  
Do not touch them.

Mandatory connection to the protective earth (PE).

Connection of the shield to the ground. 

Hot surface.

Содержание CFW500 V1.8X













































































































































































Отзывы:

Нет отзывов