WEG CFW500 V1.8X, Руководство по программированию, Страница: 171 / 172

SoftPLC
18
CFW500 | 18-1
18 SOFTPLC
The SoftPLC function allows the inverter to assume PLC (Programmable Logical Controller). For further details
regarding the programming of those functions in the CFW500, refer to the CFW500 SoftPLC manual. Below are
described the parameters related to the SoftPLC.
P1000 – SoftPLC Status
Adjustable
Range:
0 = No App.
1 = Installing App.
2 = Incompat. App.
3 = App. Stopped
4 = App. Running
Factory
Setting:
0
Properties: ro
Access Groups
via HMI:
READ, SPLC
Description:
It allows the user to view the status in which the SoftPLC is. If there are no applications installed, the parameters
P1001 to P1059 will not be shown on the HMI.
If this parameter presents option 2 = Incompat. App., it indicates the user’s program loaded on the SoftPLC is
not compatible with the CFW500 firmware version.
In this case, it is necessary that the user recompile the project on the WLP, considering the new CFW500
version and redo the download. If that is not possible, the upload of this application can be done with the WLP,
provided that the application password is known or is not enabled.
P1001 – Command for SoftPLC
Adjustable
Range:
0 = Stop Program
1 = Run Program
2 = Delete Program Factory
Setting:
0
Properties:
Access Groups
via HMI:
SPLC
Description:
This parameter allows stopping, running or excluding an application installed, but to do so, the motor must be
disabled.
P1002 – Scan Cycle Time
Adjustable
Range:
0 to 65535 ms Factory
Setting:
Properties:
ro
Access Groups
via HMI:
READ, SPLC
Description:
This parameter sets the application scanning time. The larger the application, the longer is the scanning time.