WaterLogic WL Cube, Руководство по эксплуатации, установке и обслуживанию

Страница: 36 / 76

5. Remove the top panel by placing your hands on the top as
shown in the picture and push it backwards and then lift it up
to remove.
6. Replace the carbon block filter. Insert your finger into the top
of the carbon block filter (the filter that is closer to the front of
the machine) and pull the lever up to the vertical position.
7. Pull the lever straight up to remove the filter assembly (some
slight force may be required)
8. Unscrew the filter body from the filter head by turning the
base in an anti-clockwise direction.
9. Remove the filter cartridge from the filter head by pulling it
out as shown.
10. Remove the new filter cartridge from the packaging and fit
it by firmly pushing it into the filter head, making sure it is
firmly and securely fitted.
11. Screw the filter body to the filter head, making sure it’s
securely tightened.
12. Fit the filter assembly into the machine as follows:
CUBE Operating, Installation, and Service Manual Page 36 - Revision: 6-23-2015