WaterLogic WL Cube, Руководство по эксплуатации, установке и обслуживанию

Страница: 48 / 76

11. Screw the filter body to the filter head, making sure it’s securely
tightened.
12. Fit the filter assembly into the machine as follows:
Insert the filter assembly back into its cradle, aligning the two male
spigots with the female holes in the cradle
Push it firmly until the filter sits snugly and is flush with the cradle
top surface
Lock the filter by closing the locking lever until it ‘clicks’ into place
13. Reinstall the top cover and insert the two screws at the rear of the
machine that secure it
14. Turn on the water supply at the isolation point
15. Reconnect the power lead and insert it into the
rear of the machine. Turn On the Red Power
Switch. I=ON
16. Place a container under the dispense area. Select the Hot Water
Icon and then the Dispense button.
Dispense 2 cups of Hot Water.
CUBE Operating, Installation, and Service Manual Page 48 - Revision: 6-23-2015