![background image](http://html1.mh-extra.com/html/waterlogic/wl-cube/wl-cube_operating-installation-and-service-manual_3642828047.webp)
3.
Switch off the Red Power and the
Green
Heater/Compressor Switches O=OFF
at the
rear of the machine and remove the
power
lead from the unit.
4.
Use a Phillips-head screwdriver to remove the two screws at the
rear of the machine that secure the top panel.
5.
Remove the top panel by placing your hands on the top as shown,
and push it towards the rear of the
Cube
then lift to remove.
6.
Insert your finger into the round hole of the lever, and pull the
lever up to the vertical position.
7.
Pull the lever straight up to remove the filter assembly (some
slight force may be required)
8.
Unscrew the filter body from the filter head by turning the base in
an anti-clockwise direction.
9.
Pour away the excess water.
10.
Remove the filter cartridge from the filter head as shown.
CUBE
Operating, Installation, and Service Manual
Page 47 - Revision: 6-23-2015
Содержание WL Cube
Страница 11: ...CUBE FLOW DIAGRAM CUBE Operating Installation and Service Manual Page 11 Revision 6 23 2015...
Страница 16: ...PCB LED CODES CUBE Operating Installation and Service Manual Page 16 Revision 6 23 2015...
Страница 53: ...CUBE MAIN DRAWING AND PARTS LIST CUBE Operating Installation and Service Manual Page 53 Revision 6 23 2015...
Страница 56: ...CUBE PARTS DRAWING AND PARTS LIST CUBE Operating Installation and Service Manual Page 56 Revision 6 23 2015...