![background image](http://html1.mh-extra.com/html/waterlogic/wl-cube/wl-cube_operating-installation-and-service-manual_3642828067.webp)
FAULT CODES
Leak Detection Icon Flashing
Most leaks will be detected by either the internal leak detection system that will trigger an alarm, or will
trip the Waterlogic block located in the installation kit
Solution
1.
Turn off green heater/compressor switch and red power switch.
2.
Unplug unit.
3.
Remove top cover.
4.
Remove right side panel (left side if standing behind unit).
5.
Dry inside of unit.
6.
Replace top cover (leave side panel off).
7.
Connect power cord.
8.
Turn on red power switch.
9.
Dispense water and check for leak.
10.
Once leak is located, correct issue.
11.
Remove top cover.
12.
Replace side panel.
13.
Replace top cover.
14.
Turn on green heater/compressor switch.
Leak Detection Indicator
CUBE
Operating, Installation, and Service Manual
Page 67 - Revision: 6-23-2015
Содержание WL Cube
Страница 11: ...CUBE FLOW DIAGRAM CUBE Operating Installation and Service Manual Page 11 Revision 6 23 2015...
Страница 16: ...PCB LED CODES CUBE Operating Installation and Service Manual Page 16 Revision 6 23 2015...
Страница 53: ...CUBE MAIN DRAWING AND PARTS LIST CUBE Operating Installation and Service Manual Page 53 Revision 6 23 2015...
Страница 56: ...CUBE PARTS DRAWING AND PARTS LIST CUBE Operating Installation and Service Manual Page 56 Revision 6 23 2015...