WAGO 750-363/0040-0000 Скачать руководство пользователя страница 212

Страница: 212 / 254

212 I/O Modules

WAGO-I/O-SYSTEM 750

750-363/0040-0000 FC EtherNet/IP G4 ECO XTR

Manual

Version 1.0.0

12.2.5 Specialty Modules

In addition to the data bytes, the control/status byte is also displayed for select

I/O modules. This byte is used for the bi-directional data exchange of the I/O

module with the higher-level control system.

The control byte controls the I/O module's behavior and operation. The status

byte reports the I/O module's status. It is possible to set the counter with the

control byte or indicate a range overflow/underflow with the status byte.

The control/status byte always lies in the low byte for the fieldbus

coupler/controller with EtherNet/IP.

Information for the control/status byte development

Please refer to the corresponding description of the I/O modules for the structure

of the control/status bytes. You can find a manual with the relevant I/O module

description at:

http://www.wago.com

The specialty modules represent analog input/output modules.

Therefore, their process input values also occupy one instances per channel in

the “Analog Input Point Object” (class 0x67) and their process output values one

instance per channel in the “Analog Input Point Object” (class 0x68).

12.2.5.1 Serial Interfaces with Alternative Data Format

The process image depends on the parameterized operating mode!

The operating mode of the configurable I/O module can be set. Based on the

operating mode, the process image of these I/O modules is then the same as

that of the respective version.

The I/O modules with serial interface that are set to the alternative data format

occupy 4 bytes of user data in the input and output area of the process image, 3

data bytes and one additional control/status byte. Two words are assigned in the

process image via word alignment.

Table 192: Serial interfaces with alternative data format

Input and Output Process Image

Instance

Byte designation

Remark

High byte

Low byte

C/S

Data byte

Control/status

byte

n+1

Data bytes

The specialty modules represent 2x2 bytes and occupy 2 instances in class

(0x67) and 2 instances in class (0x68).

Содержание 750-363/0040-0000































































































































































































































































Результаты поиска

Содержание 750-363/0040-0000

Отзывы:

Бренды по названию

Популярные бренды

WAGO 750-363/0040-0000, Руководство пользователя

Результаты поиска

Содержание 750-363/0040-0000

Отзывы:

Бренды по названию

Популярные бренды