WAGO 750-363/0040-0000 Скачать руководство пользователя страница 21

Страница: 21 / 254

WAGO-I/O-SYSTEM 750

System Description 21

750-363/0040-0000 FC EtherNet/IP G4 ECO XTR

Manual

Version 1.0.0

System Description

The 750 XTR Series is part of the WAGO I/O SYSTEM 750.

The WAGO I/O SYSTEM 750 is a modular, fieldbus-independent input/output

system (I/O system). The configuration described here consists of a fieldbus

coupler/controller (1) and the modular I/O modules (2) for any signal shapes that

form the fieldbus node together. The end module (3) completes the node and is

required for correct operation of the fieldbus node.

Figure 1: Fieldbus Node (Example)

Fieldbus couplers/controllers are available for different fieldbus systems.

The ECO coupler contains the fieldbus interface, electronics and a power supply

for the system. The fieldbus interface forms the physical interface to the relevant

fieldbus. The electronics process the data of the bus modules and make it

available for the fieldbus communication.

I/O modules for diverse digital and analog I/O signals as well as special functions

can be connected to the fieldbus coupler/controller. The communication between

the fieldbus coupler/controller and the I/O modules is carried out via a local bus.

The components of the WAGO I/O SYSTEM 750 have clear termination points,

light emitting diodes for status display, plug-in mini WSB tags and group marker

cards for labeling.

The 1, 2 or 3 wire technology supplemented by a ground wire connection allows

for direct sensor or actuator wiring.

The distinctiveness of the 750 XTR Series lies in its area of application in

extreme environmental conditions. It is extremely temperature-resistant, immune

to interference, as well as insensitive to vibrations and impulse voltages.

The components of the 750 XTR Series are easily recognizable by their dark-

gray housing color.

Содержание 750-363/0040-0000































































































































































































































































Результаты поиска

Содержание 750-363/0040-0000

Отзывы:

Бренды по названию

Популярные бренды

WAGO 750-363/0040-0000, Руководство пользователя

Результаты поиска

Содержание 750-363/0040-0000

Отзывы:

Бренды по названию

Популярные бренды