manualshive.com logo in svg

Wacker Neuson DT08-D, Руководство оператора

Поделиться
Скачать
Wacker Neuson DT08-D Скачать руководство пользователя страница 83

BA DT08 SL EN – Edition 1.0  * dt08b530.fm

5-23

Maintenance

Exterior of the machine

Caution!

Cleaning the machine can cause engine damage.

☞

Protect the engine against humidity

The following articles are generally suitable:
• High-pressure cleaner
• Steam jet

Engine compartment

Danger!

Clean the engine at engine standstill only –

Danger of personal injury!

☞

Stop the engine before cleaning

Caution!

When cleaning the engine with a water or steam jet 

☞

The engine must be cold

☞

and do not point the jet directly at electric sensors such as the oil pressure 
switch.

The humidity penetrating any such sensors causes them to fail and leads to 
engine damage!

Screw connections and attachments

All screw connections must be checked regularly for tightness, even if they are not listed in 
the maintenance schedules.

☞

Engine fastening screws

☞

Fastening screws on the hydraulic system

☞

Line and pin fastenings on the attachment

Tighten loose connections immediately. Contact an authorised workshop if necessary.

Pivots and hinges

Lubricate all mechanical pivots on the machine (such as joints) and fittings at regular inter-
vals even if they are not listed in the lubrication plan.

Содержание DT08-D







































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды