manualshive.com logo in svg

Wacker Neuson DT08-D, Руководство оператора

Поделиться
Скачать
Wacker Neuson DT08-D Скачать руководство пользователя страница 26

2-6

BA DT08 SL EN – Edition 1.0 * * dt08b210.fm

Safety instructions

Applications with lifting gear

Definition:

Applications with lifting gear are understood as procedures involving raising, transporting 
and lowering loads with the help of slings and load-securing devices (e.g. ropes, chains). 
In doing so, the help of persons is necessary for securing and detaching the load. This 
applies for example to lifting and lowering pipes, shaft rings or containers. 
• No applications with lifting gear!

Trailers

• Hitching and towing other vehicles is not allowed!

Transport

• The machine must be loaded and transported only in accordance with the Operator’s 

Manual! 

• For towing the machine observe the prescribed transport position, admissible speed 

and itinerary.

• Use only suitable means of transport of adequate capacity/payload! 
• Safely secure the machine on means of transport! Use suitable mounting points and 

load-securing devices

• The recommissioning procedure must be strictly in accordance with the Operator’s 

Manual! 

Temperature ranges

The machine can be used at a maximum temperature of +45 °C and a minimum tempera-
ture of 

−

15 °C. Get in touch with your Wacker Neuson dealer if you intend to use the 

machine in other temperature ranges (e. g. tropical temperatures, etc.). 
Carry out all maintenance and inspection work before storing the machine for the winter. 
Then store the machine in a dry place at ambient temperature (about +15 °C). Observe 
these temperature ranges so as not to affect the machine’s service life.

Содержание DT08-D







































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды