manualshive.com logo in svg

Wacker Neuson DT08-D, Руководство оператора

Поделиться
Скачать
Wacker Neuson DT08-D Скачать руководство пользователя страница 82

5-22

BA DT08 SL EN – Edition 1.0 * * dt08b530.fm

Maintenance

5.8 General maintenance work

Cleaning

Cleaning the machine is divided into 3 separate areas:
• Exterior of the machine
• Engine compartment
The wrong choice of cleaning equipment and agents can impair the operating safety of the 
machine on the one hand, and on the other undermine the health of the persons in charge 
of cleaning the machine. It is therefore essential to observe the following instructions.

General instructions for all areas of the machine

Cleaning with washing solvents

• Ensure adequate room ventilation
• Wear suitable protective clothing
• Do not use flammable liquids, such as petrol or diesel

Cleaning with compressed air

• Work carefully
• Wear goggles and protective clothing
• Do not aim the compressed air at the skin or at other people
• Do not use compressed air for cleaning your clothing

Cleaning with a high-pressure cleaner or steam jet

• Electric components and damping material must be covered and not directly exposed 

to the jet

• Cover the vent filter on the hydraulic oil tank and the filler caps for fuel, hydraulic oil etc.
• Protect the following components from moisture:

• Engine
• Electrical components such as the alternator etc.
• Control devices and seals
• Air intake filters etc.

Cleaning with volatile and easily flammable anticorrosion agents 
and sprays:

• Ensure adequate room ventilation
• Do not use unprotected lights or naked flames
• Do not smoke!

Содержание DT08-D







































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды