W6 N 9500C QPL Скачать руководство пользователя страница 9

Страница: 9 / 281

Instructions for use

Safety notes

1.2

Instructions for use

Please take note of the following points when handling the machine:

•

Always use a W6 trolley to safely transport the machine.

•

If you are pregnant, let someone help you when assembling and moving
the machine.

•

When unpacking, make sure that you choose a secure surface to unpack
the machine safely.

•

Keep animals and objects away from the area around the sewing
machine.

•

Always operate the machine on a sturdy, clean and level surface.

•

Keep children away from the machine.

•

Always keep animals and objects away from the area around the

‹foot

controller›

•

Replace defective or damaged machine parts immediately.
Only use original parts!

•

Change the needles regularly. Worn or damaged needles pose a hazard.

•

Spare parts and tools must comply with the technical requirements laid
down by the manufacturer! This is always guaranteed with original spare
parts.

•

Perform maintenance work in the manner described in this manual.

•

Observe the deadlines for recurring maintenance work.

•

Only rectify faults when the machine is switched off. Unplug the

‹power

plug›

too.

•

Never change, dismantle or bypass safety devices.

•

Never deactivate safety equipment.

•

Never make structural changes to the machine.

•

Never operate the machine outdoors where it is exposed to the elements.

•

In the event of a malfunction, switch the machine off immediately.

•

W6 WERTARBEIT offers frequent sewers an annual inspection, at the
owner’s expense, after a year. Normal use indicates that an inspection
should be performed every two to four years.

Содержание N 9500C QPL


























































































































































































































































































Результаты поиска

Содержание N 9500C QPL

Отзывы:

W6 N 9500C QPL, Руководство пользователя, Страница: 9 / 281

Результаты поиска

Содержание N 9500C QPL

Отзывы: