W6 N 9500C QPL, Руководство пользователя

Страница: 124 / 281

Utility stitches
Using a pattern
11.3.4 Stretch straight stitch: program 004
Standard foot,
Super Stretch 90 or 75 needle
These strong and durable stitches are used if elasticity is required in order to
ensure comfort and durability.
Prerequisite:
•
You have read the safety notes for this sewing machine, see “Safety
Notes”.
•
You have set up the machine in a safe place; see “Setting Up”.
•
You have connected the machine properly, see “Connecting the machine”.
•
You have threaded the sewing thread properly, see “Threading the upper
thread”. In this regard, also view the “Criteria for optimal threading of a
W6 N 9500 QPL” video that is just 4 minutes long under Service / Help on
our website at www.w6-wertarbeit.de.
•
Use a W6 Super Stretch 90 (HAx1SP) needle for stretch and non-
stretch fabrics or a W6 Super Stretch 75 (HAx1SP) needle for thinner
fabrics. If necessary, install a special needle.
•
You are using W6 plastic bobbins and thread tension-friendly and lint-free
W6 thread.
•
The presser foot that matches the pattern is installed.
Carry out the following steps:
1. Set the ‹presser foot lifter› to the upper position.
Then press the ‹Needle Up / Needle Down› button once.
W6 note
Please note: It must be ensured that the thread take-up lever, covered by the
face plate, and the needle are in a specific position before threading and
changing any programs.
Set the Presser foot to the upper position, the thread tension is then open. Press
the Needle Up / Needle Down button once. The thread take-up lever and needle
move to the correct starting position automatically.
•
Failure to do this will always result in a sloppy seam, blockages or
damage to the sewing machine. In the event of any lack of clarity, further
information can be found on www.w6-wertarbeit.de under Service / HELP:
Criteria for optimal threading.
The lower thread has been pulled taut and carefully to the 7 o’clock and 9 o’clock
positions in the silver slot of the black hook race. When pulling it in, you will hear
a definite clicking at the 7 and 9 o’clock positions.
The lower thread tension is active. You have performed a tension test.
•
Failure to do this will always result in a sloppy seam, blockages or
damage to the sewing machine. In the event of any lack of clarity, you can
obtain information on www.w6-wertarbeit.de under Service/ HELP/ W6 N
9500 Criteria for optimal threading.
124