W6 N 9500C QPL, Руководство пользователя

Страница: 60 / 281

Winding a new W6 plastic bobbin
What do I do with the lower thread?
Set the Presser foot to the upper position, the thread tension is then open. Press
the Needle Up / Needle Down button once. The thread take-up lever and needle
move to the correct starting position automatically.
•
Failure to do this will always result in a sloppy seam, blockages or
damage to the sewing machine. In the event of any lack of clarity, further
information can be found on www.w6-wertarbeit.de under Service / HELP:
Criteria for optimal threading.
The lower thread has been pulled taut and carefully to the 7 o’clock and 9 o’clock
positions in the silver slot of the black hook race. When pulling it in, you will hear
a definite clicking at the 7 and 9 o’clock positions.
The lower thread tension is active. You have performed a tension test.
•
Failure to do this will always result in a sloppy seam, blockages or
damage to the sewing machine. In the event of any lack of clarity, you can
obtain information on www.w6-wertarbeit.de under Service / HELP / W6 N
9500 Criteria for optimal threading.
Press the Needle Up / Needle Down button once,
if the presser foot is up.
2. Place a W6 WERTARBEIT upper thread spool on the ‹spool pin› .
! Lift the ‹spool pin› slightly to do this. Make sure that the
thread runs smoothly.
60