W6 N 9500C QPL Скачать руководство пользователя страница 40

Страница: 40 / 281

Display

Operating elements

5.16.2

Stitch Width button (2)

Function:

1. Press the Stitch Width button.
2. The Stitch Width button flashes.

Press the

button to set the stitch width you want.

4. Confirm the stitch width you want by pressing the Stitch Width button

again.

5. The stitch width no longer flashes.
6. The stitch width is set.

5.16.3

Control buttons (3)

Pattern Selection button and setting selection for stitch length setting and stitch
width setting.

5.16.4

Memory button (4)

Function for saving pattern or letter sequences.

PLEASE NOTE

THE PRESSER FOOT MUST BE IN THE UP POSITION.

•

Activation:

The Memory button is activated when a solid outer border is

placed around the dashed inner border. This means:

The memory is open with a maximum of 60 memory locations.
Please note. The #007–#021 patterns cannot be stored.

•

Deactivation:

The Memory button is deactivated when only the dashed

outline appears.

The memory is deactivated.

5.16.5

Cut function (5)

The cut function only works if the machine is at a standstill. The upper and lower
thread are cut simultaneously and pulled to the wrong side of the fabric.

PLEASE NOTE

DO NOT CHANGE THE PROGRAM, RAISE THE
PRESSER FOOT OR PULL ON THE FABRIC DURING
THIS PROCESS.

CAUTION

This is not covered by the warranty.

•

Activation:

The cut function is activated when a solid outer border is

placed around the dashed inner border.

•

Deactivation:

The cut function is deactivated when only the dashed

outline appears.

Содержание N 9500C QPL


























































































































































































































































































Результаты поиска

Содержание N 9500C QPL

Отзывы:

Похожие инструкции для N 9500C QPL

Бренды по названию

Популярные бренды

W6 N 9500C QPL, Руководство пользователя

Результаты поиска

Содержание N 9500C QPL

Отзывы:

Похожие инструкции для N 9500C QPL

Бренды по названию

Популярные бренды