W6 N 9500C QPL Скачать руководство пользователя страница 16

Страница: 16 / 281

Unplugging the power plug

Assembling the machine

Slowly press the

‹foot controller›

to start sewing.

The further the

‹foot controller›

is pressed, the faster the machine

sews.

Alternatively, you can sew without the foot controller, just unplug the foot
controller. Start and stop the sewing machine using the

‹Start-Stop›

button. Give it a try, you’ll be amazed.

Release

the

‹foot

controller›

when you want to stop sewing.

Alternatively: Unplug the foot controller and start and stop the sewing
machine using the

‹Start-Stop›

button. You can control the speed using

the Speed Control button.

Set the

‹on / off switch›

to the “0” (OFF) position to

switch the machine

off.

» The machine is connected.

2.4

Unplugging the power plug

In the following situations you should switch the machine off at the

‹on / off

switch›

and pull the plug out of the socket:

•

If the machine is left unattended.

•

If you are replacing the needle or bobbin.

•

If you are removing the covers.

•

If a power failure occurs during use.

•

During thunderstorms.

Содержание N 9500C QPL


























































































































































































































































































Результаты поиска

Содержание N 9500C QPL

Отзывы:

W6 N 9500C QPL, Руководство пользователя, Страница: 16 / 281

Результаты поиска

Содержание N 9500C QPL

Отзывы: