Tape Monitor
Not set
Mon/Proc LED off
Suppress Out of Balance display Not set
None
Programming Lock Out
Not set
None
Quick Reference: Special Programming Functions
Function Programming
Sequence
Enable Trigger Output:
To set up to 2 Trigger
outputs to remotely turn on your system
components that can accept the 12V turn-on.
During the power up 90 to 0 countdown
sequence, user holds down any of Input 1 thru 2
buttons, i.e. CD, AUX 1 (for trigger 1 through 2).
To set trigger timer, user rotates control knob
clockwise to 99 maximum (to increase trigger time)
or counter-clockwise to 01 minimum (to decrease
trigger time). No two triggers can be set for the
same turn on time - numerical display skips already
selected trigger times.
Disable Trigger Output
To undo the Trigger timer, during 90 to 0
power up sequence, hold the button for the
Trigger output and
rotate the volume control
counter-clockwise until numerical display shows
OF.
Suppress Power on Countdown timer
If you do not wish to see the 90 to 0 countdown
when the preamp goes through the power up
sequence, you can suppress the display by pressing
the Mute button during the countdown sequence.
Any programmed trigger indication will be
suppressed also.
Set input to Unity Gain (for any input CD…
Aux 5)
While the preamp is in operate mode, select the
input you wish to set to Unity Gain. Then hold the
Mon/Proc
button and at the same time press the
input button again. The numeric display changes
to
UI
to indicate that Unity Gain is set., and the
Mute LED blinks.
Remove Unity Gain setting from an input
While the preamp is in operate mode, select the
input that you wish to reset the Unity Gain. Note
the Mute LED blinks. Hold down the
Mon/Proc
button first and then press the input again. The
numeric display changes to indicate the volume for
that input prior to setting Unity Gain.
Set Input Level Offset:
Input offsets are used
for equalizing volume gain levels between
different inputs that have different output levels,
While the preamp is in operate mode, hold the
button of the input you wish to set the Offset, and
rotate the volume control knob at the same time.
TL5.5 SERIES II Preamplifier Owner’s Manual
VTL
22
Содержание TL5.5 Series II Signature
Страница 1: ...VTL TL5 5 Series II Signature Preamplifier Owner sManual...
Страница 3: ......