Operational Warnings
It is critical for proper sonic performance of this
component that it be properly configured for the mode
of operation while playing. If a balanced signal is
applied to the inputs the unit must be configured for
balanced operation, and vice-versa.
Always make all connections before powering the TL5.5 on.
Connecting or disconnecting the TL5.5 while powered on
can damage the output stage, and will not be covered under
the warranty. Ensure that no interconnect cables can become
loose during use and that there are no intermittent faults or
shorts with the cables.
Do not attempt to disassemble the TL5.5 chassis or
remove any covers from the unit.
Always consult with your
VTL authorized dealer or the VTL factory before attempting
any service work on any VTL unit.
Do not touch the tubes after the TL5.5 is turned on
. The
tubes can get very hot while the TL5.5 is operating. Turn off the
TL5.5 and allow the tubes to cool down before attempting to
work with the tubes.
Tube components can be heavy and awkward to lift, with the
weight unevenly distributed, and you should not attempt to move
the unit without help. The TL5.5 Preamplifier weighs approximately
40 lbs.
(
18.14 Kg)
.
Do not exceed fuse ratings or attempt to bypass any fuses, as
this can cause an extremely hazardous condition and will void
any warrantees. Use only the same type and rating of fuses as
specified in the owners’ manual and marked on the
unit.
TL5.5 SERIES II Preamplifier Owner’s Manual
VTL
4
Содержание TL5.5 Series II Signature
Страница 1: ...VTL TL5 5 Series II Signature Preamplifier Owner sManual...
Страница 3: ......