VTL TL5.5 Series II Signature, Руководство пользователя

Страница: 42 / 58

carriage return, and /R as a return. The input and output buffers of the TL5.5 SERIES
II can hold a maximum of 256 bytes at one time.
The available RS-232 user commands are:
Command Meaning / Use Expected response
>HELP or
>? For displaying a list of all
available commands All commands and their syntax.
>ENTER COMMAND:
(input={CD|AUX1|PHAUX2|AUX3|TU
N|AUX4|AUX5|TAPE})
> BALANCE [{L|R|+|-}n], BALANCED
[input][ON|OFF], COUNTDN [ON|OFF],
> DSPLYOFF [n], DISABLE [input],
ENABLE [input], FADE, INPUT [input],
> HELP, LOCKOUT [ON|OFF], MUTE
[ON|OFF], OFFSET [[+|-]n], PHASE
[0|180],
> POWER [ON|OFF], STATUS,
TRIGGER, UNITY [input][ON|OFF],
VERSION,
> VOLUME [[+|-]n], VTL
>STATUS For querying the status
of the preamplifier Returns current status as set, for
example: >STATUS: POWER ON,
INPUT CD, VOLUME 0, PHASE 0,
OFFSET 0, UNITY GAIN OFF,
BALANCED
>POWER
{ON|OFF} For powering the
preamplifier ON and
OFF Returns current power status.
>STANDBY for > POWER OFF
command
>TURNON SEQUENCE STARTED
for >POWER ON command, with
>TURNON SEQUENCE
FINISHED for completed power up
sequence.
>MUTE
{ON|OFF} For muting and
unmuting the
preamplifier Returns current mute status.
>VOLUME [[+|-
]n] For raising or lowering
volume, or going directly
to a particular volume
setting. Raises (or lowers) the volume in single
step increments (or decrements) and
outputs the new volume setting to the
RS-232 port
>INPUT [input]
(input={CD|AU For changing the active
input. Returns current active input.
TL5.5 SERIES II Preamplifier Owner’s Manual
VTL
37