VTL TL5.5 Series II Signature, Руководство пользователя

Страница: 22 / 58

Your authorized VTL dealer can supply the connector, and make up the correct cable
for triggering other devices in your system (usually power amplifier(s)), which will be a
custom length, and will include the correct connector for the device to be triggered.
The dimensions of the connector, in mm are:-
The polarity of the trigger voltage is po on the pin closest to you with the side
view shown above, and in the photo below positive is the closest left-most screw-
terminal pin, with negative – to the right of that (note that the locator pin shown on
the left of the diagram above is on the far side of the photo).
Note that the device being triggered should not place a high electrical load on the
trigger output of the TL-5.5
TL5.5 SERIES II Preamplifier Owner’s Manual
VTL
17