Connecting to the Turntable
If your TL-5.5 Series II Preamplifier is equipped with the optional internal phono stage,
you can use the phono stage with either MM or MC cartridge. The VTL factory
standardly configures the TL-5.5 II phono stage to work with a MC cartridge and with the
following standard settings:
1.
MC input selected (MC CON jumper in)
2.
Gain = 66dB
3.
MC Load = 1K Ohm
4.
Standard RIAA
If you would like to alter the standard setting, please follow the instructions in the
Addendum section or contact your dealer for assistance.
Operating Modes and Factory Default Settings
Powering the TL5.5 off from the front panel or remote wand will save all of the
existing settings to memory for use at a later power up. Loss of power before the
settings are saved will cause the settings to be lost from memory, and the preamplifier
will have to be programmed again and the settings saved by powering down from the
front panel or remote power buttons. Powering down from the rear rocker switch has
the same effect as loss of power, and does not save settings to memory.
Function
Default
Mode
Indication
Suppress timer countdown
Not set
Timer decrements
Trigger output
None set
None
Inputs CD, AUX1 (Defaults to
input CD selected)
Balanced mode
Selected input LED
color is blue
Volume setting
Zero volume
0 on numeric display
Mute
Not selected
Mute LED off
Input level offsets
Not set
None
Phase
Phase correct
Phase LED off
Channel Balance
Not selected, no imbalance
Bal LED off
Unity Gain input
Not set
None
TL5.5 SERIES II Preamplifier Owner’s Manual
VTL
21
Содержание TL5.5 Series II Signature
Страница 1: ...VTL TL5 5 Series II Signature Preamplifier Owner sManual...
Страница 3: ......