VTL TL5.5 Series II Signature, Руководство пользователя

Страница: 28 / 58

so that when an input is selected the overall
volume of the system will not change. The numeric display will now indicate the Offset
value that you wish to set. Release the input button
to complete the setting.
To remove Input level Offset, hold the input
button down and turn the volume control
counterclockwise until numeric display indicates
00.
View Input Level Offset: (In Lock Out
Mode only) Hold the Input button and the numeric display will
button will indicate the Offset value.
Suppress Out-of-Balance display
Hold the Balance button and press the Mute
button.
Re-enable the Out-of-Balance display Hold the Balance button and press the Mute
button again.
Disable Input: Disabled inputs cannot be
selected and used in any way after being
disabled. While the preamp is in Power-on mode, select the
input you wish to disable and hold down the Mute
button at the same time.
Re-enable Input: To re-enable the input. While the preamp is in Power-on mode, select the
input you wish to re-enable and hold down the
Mute button at the same time.
Programming Lock Out Mode: Setting and
resetting of Triggers, Unity Gain, Balanced or
Single-ended mode for any input, and input
Offset are all disabled. This setting is done during Power down cycle only.
Hold the
Mon/Proc button and press the Power
button on the front panel and release the
MON/Proc button after pressing the Power
button.
Restore Programming Mode: Remove the
Lock out mode to enable Trigger, Unity
Gain, Balanced/Single-ended selection, and
Input Offset. This setting is done during Power up cycle only.
Hold the
Mon/Proc button and press the Power
button on the front panel, and release the
MON/Proc button after pressing the Power
button.
LED Indications
Power LED:
When the unit is powered on by pressing the Power button on the front panel, the LED
light will be lit. When the unit is powered off, the LED lights are turned off.
Blink blue during Power up sequence and the trigger sequence.
Remain steady blue after power up and trigger sequence.
Inputs 1 & 2 LED (CD, Aux 1)
TL5.5 SERIES II Preamplifier Owner’s Manual
VTL
23