VTL TL5.5 Series II Signature, Руководство пользователя

Страница: 44 / 58

X4,AUX5,TAPE
>COUNTDN
{ON|OFF} For toggling between
muting and unmuting
the power up
countdown Returns current countdown status.
>
DSPLYOFF [n] For automatically
turning off the display
after last command after
programmed number of
seconds 0 – 99, with 00
for always on.
Returns current time, in seconds, that
display will shut off after last command,
for example:
>DSPLYOFF 00
>LOCKOUT
[ON|OFF] For toggling between
front panel locked and
unlocked. >LOCKOUT OFF for unlocked front
panel
>LOCKOUT ON for locked front
panel
>VTL Returns factory contact
info Contact VTL:
Email: mail@vtl.com
Tel. 909-627-5944
Fax. 909-627-6988
>VERSION Returns the version
number of the software. Installed version of the software:
>Version 072109
Powering the system off
You may keep your VTL preamplifier and your source components on permanently if you
prefer to keep them warm. If you prefer to keep all your equipment off when not in use
then it is best to follow the correct turn off sequence to avoid power off thumps through
the system. (If the power fails or if you accidentally turn off the preamp before turning the
power amplifiers off, the preamplifier will power down in a muted state and no damage
will be done to your system.)
1. When you’re done listening to your system always turn your power amplifier(s) off
first, if not using the trigger function on the TL5.5.
TL5.5 SERIES II Preamplifier Owner’s Manual
VTL
39