VTL TL5.5 Series II Signature, Руководство пользователя

Страница: 29 / 58

During Power up sequence, these LEDs will blink RED if that trigger (either inputs 1
and 2) is programmed, else no LED is lit.
During trigger sequence, blink red until trigger activates, then steady red while other
triggers activate, then off after all programmed triggers activated.
After trigger sequence, LED will turn OFF if not selected as input. If selected as input,
LED will turn green for single-ended RCA input, blue for balanced XLR input.
Input 3 LED (Phono/Aux 2 )
After power up sequence, LED will turn OFF if not selected as input. If selected as
input, LED will turn green for single-ended RCA input. If the preamplifier is
equipped with the internal phono stage, holding the Phono/Aux 2 input for over 5
seconds will enable the Rumble Filter setting and the LED will turn red. To disable
Rumble Filter setting, press the Phono/Aux 2 input for another 5 seconds and the
LED will turn green.
Inputs 4, 5, 6 and 7 LED (Aux 3, Tuner, Aux4, Aux 5)
Inputs 4, 5, 6 and 7 are for single-ended inputs only. During Power up and trigger
sequence, these LEDs are not lit.
After trigger sequence, LED will stay OFF if not selected as input. If selected as input,
LED will turn green for RCA input.
Tape
During Power up and trigger sequence, LED is not lit.
After power up and trigger sequence, if Tape is selected as input, LED will turn green.
If Tape monitor is selected after power up and trigger sequence, LED will turn red.
Tape monitor will be dropped if different input is selected, and will not return after
power down and re-power up.
Mon/Proc LED
During Power up and trigger sequence, no LED.
After power up and trigger sequence, lights red if monitor function selected.
Phase LED
During Power up sequence, no LED.
After power up and trigger sequence, LED off for Phase correct and red for Phase
inverting.
TL5.5 SERIES II Preamplifier Owner’s Manual
VTL
24