4.5 - GREEN MACHINE
™
- North America - Installation, Operation, Maintenance, & Troubleshooting Manual
Chapter 4: Control Panel
Page 70
Maintenance Screen, continued…
•
When the Maintenance Screen is shown, the GREEN MACHINE will always be in the OFF
mode (unless the Manual ON button is pushed or testing is being conducted).
See Figure 4-3
.
•
The UST Pressure is displayed as Inches of Water (IWC).
•
The GREEN MACHINE can be placed in the Manual ON or Manual OFF mode only in the
Maintenance Screen.
•
This feature is used when conducting maintenance on the GREEN MACHINE.
•
Vac Pump Bump is used to check the vacuum pump motor rotation during start-up or after
performing maintenance on the vacuum pump motor.
•
The Reset Motor Alarm is used when the Vacuum Pump is in Alarm.
•
Function Button labels are shown at the bottom of the screen.
•
The F1, F2, F3, F4 Function buttons and the ESC button are accessible
•
F1: Start a Leak Test
•
F2: Start a Functionality Test
•
F3: NOT USED
•
F4: Stops all testing and returns to the Maintenance Screen in the OFF Mode.
•
Pushing the ESC button stops all testing and returns to the Main Screen to the Normal
Operating Mode.
