4.5 - GREEN MACHINE
™
- North America - Installation, Operation, Maintenance, & Troubleshooting Manual
Chapter 10: Operator Instruction Sheet
Page 193
Chapter 10: Operator Instruction Sheet
10
Alarm Instructions
•
See Figure 10-3 for the Alarm Screen.
10.1
Controller Screen
•
If the Controller Screen is blank (no power):
1. Make sure the GREEN MACHINE Breaker is turned on at the distribution panel.
2. Make sure the Power Switch on the front of the Control Panel is turned ON.
3. Make sure the Safety Disconnect Switch at the GREEN MACHINE is turned ON.
4. Make sure the gasoline station ESO is not active.
•
If it is active, power will be OFF to the Control Panel.
•
When the ESO is de-activated, power will be restored to the VST Control
Panel.
•
If items 1-4 are true, and the Controller screen is still blank, call your GREEN MACHINE
Authorized Service Contractor (ASC).
10.2
Pressure Sensor Alarm
•
When a Pressure Alarm is active on the Controller:
1. Call your GREEN MACHINE Authorized Service Contractor (ASC).
10.3
Vacuum Pump Alarm
•
When a Vacuum Pump Alarm is active on the Controller:
1. From the Main Screen (
See Figure 10-1
) push the Maintenance soft button on the
PLC screen.
2. Enter 878 on the Password Screen (
See Figure 10-4
), then push the Return button
on the right-hand side of the screen.
3. ON the Maintenance Screen (
See Figure 10-2
), the “Reset Motor Alarm” button will
be RED. Push the “Reset Motor Alarm” button to reset the Vacuum Pump Motor
alarm.
4. IF THE VACUUM PUMP ALARM CONTINUES TO ALARM ON THREE CONSECUTIVE
DAYS, call your GREEN MACHINE Authorized Service Contractor (ASC).
