4.5 - GREEN MACHINE
™
- North America - Installation, Operation, Maintenance, & Troubleshooting Manual
Chapter 11: Operator Training Guide
Page 204
Maintenance Screen, continued…
•
When the Maintenance Screen is shown, the GREEN MACHINE will always be in the OFF mode
(unless the Manual ON button is pushed).
See Figure 11-4.
•
The UST Pressure is displayed as Inches of Water (IWC).
•
The GREEN MACHINE can be placed in the Manual ON or Manual OFF mode only in the
Maintenance Screen.
•
This feature is used when conducting maintenance on the GREEN MACHINE.
•
Vac Pump Bump is used to check the vacuum pump motor rotation during start-up or after
performing maintenance on the vacuum pump motor.
•
The Reset Motor Alarm is used when the Vacuum Pump is in Alarm.
•
Function Button labels are shown at the bottom of the screen.
•
The F1, F2, F3, F4 Function buttons and the ESC button are accessible.
•
F1
Start a Leak Test
•
F2
Start a Functionality Test
•
F3
Not Used
•
F4
Stops all testing and returns to the Maintenance Screen in the OFF Mode.
•
Pushing the ESC button stops all testing and returns to the Main Screen to the Normal Operating
Mode.
