4.5 - GREEN MACHINE
™
- North America - Installation, Operation, Maintenance, & Troubleshooting Manual
Chapter 11: Operator Training Guide
Page 205
11.2.4
Alarm Screen
Figure 11-5: Overfill Alarm shown on the Faults & Alarms Screen
11.3
Alarms Overview
•
The Alarms Screen shows the following alarms:
See Figure 11-5
.
11.3.1
GM Status
•
Normal (Green Box) indicates the GREEN MACHINE is operating normally (no active Alarms)
•
Alarm (Red Box) indicates an Alarm is active. When an Alarm is active, See the Operator
Instruction Sheet for directions.
11.3.2
Pressure Sensor Alarm
•
The fault will occur if the Pressure Sensor is not connected to the VST Control Panel or is wired
incorrectly at the VST Control Panel or the Pressure Sensor fails.
•
The GREEN MACHINE will not to operate during this alarm.
