GE Record Plus, Руководство по установке

Страница: 1 / 8

DEH40914 Installation Instructions
g
Record Plus
™
Molded Case Circuit Breaker
Accessories
Integral Handle Operator, Type
TDR
Congratulations and thank you for choosing the
Record Plus™ family of current-limiting circuit
breakers. The integral handle operator is listed
under UL 489 and is suitable for use with the FC100
circuit breaker series.
Record Plus™
circuit breakers are designed with a
full line of integrated accessories. All units use the
latest in integrated modular circuit breaker
technology for flexibility in application and
maximizing the product’s utilization and
capabilities.
All
Record Plus™
circuit breakers are listed by
Underwriters Laboratories to the UL489 standard
and the CSA Standard C22.2, No. 5. These circuit
breakers are certified to IEC60947-2.
These accessories are also for use with our MAG-
BREAK® instantaneous trip-only circuit breakers,
which meet the same standards and are UL-
recognized components for use in motor
applications. They can also be used with our molded
case switches, which are listed per Underwriters
Laboratories to the UL489 standard.
Record Plus™
circuit breakers and their accessories
are designed and manufactured to exceed our global
customers’ high standards for reliability and quality.
WARNING: DANGER of electrical shock or injury.
Ensure that ALL electrical power supplies are OFF
before installing or removing any devices. The
breaker, trip unit, or accessories MUST ONLY be
installed and serviced by QUALIFIED personnel. See
NEMA publication AB4.
AVERTISSEMENT: Danger contre les risques
d'électrocutions. S'assurer avant TOUTES
manipulations du disjoncteur que les différentes
sources d'alimentation sont en position OFF. Les
disjoncteurs, unités de protection, ou accessoires
doivent être installés par des personnes qualifiées et
habilitées. Lira NEMA publication AB4.
FCNRC
FCNRCNI
FCNRCN
Figure 1. TDR integral handle operator installed on a
Record Plus™
FC100 circuit breaker (vertical orientation shown).
CAUTION:
This product is NOT suitable for use
in equipment not specifically design to accept it.
Contact the equipment manufacturer for possible
equipment modifications.
ATTENTION:
Cet appareil nedoit pas etre
employe dans un equipement non specialement
adapte a cet effet. Contactez le constructeur
concernant les possibles modifications