VPG TruckWeigh, Руководство по установке, настройке и калибровке

Страница: 68 / 130

68
10. Tap the scroll up or scroll down buttons to select the trigger. The trigger setting is used to determine
what action activates the output signal. There are several options:
• Gross Weight. Select this to send a signal when the vehicle reaches a specific gross weight
• Input. Select this to send a signal when the system receives another signal from an external
device
• Body Up. Select this to send a signal when the vehicle body is raised
• Load Stability. Select this to send a signal when the load stability decreases below a specific value
• Vehicle Stability. Select this to send a signal when the vehicle stability decreases below a specific
value
• Set Point Alarm. Select this to send a signal when a set point alarm is triggered
• Trailer Weight. Select this to send a signal when the weight of a trailer reaches a specific weight
• Axle Weight. Select this to send a signal when the weight on an axle reaches a specific weight
• Axle Group. Select this to send a signal when the weight on an axle group reaches a specific
weight
• Net Weight. Select this to send a signal when the vehicle reaches a specific net weight
Each signal type and trigger option has additional
parameters that are used to configure the type of trigger.
For example; a pulse signal will require a pulse time value to determine the length of each pulse A
weight trigger will require an on and off weight value and a filter time to delay the signal in case
a value is reached accidentally. A set point alarm trigger will need to be linked to the set point
alarm you want to use etc.
11. Use the scroll and select buttons to set the additional parameters for the output.
Change PIN
There are three PIN numbers which allow different levels of access to the system. See “Menu password”
on page 46 for further information.
Each level of access is able to reset its own PIN number.
TruckWeigh
®