VPG TruckWeigh, Руководство по установке, настройке и калибровке, Страница: 34 / 130

34
9. Secure air pipe, transducer and internal domain cable to vehicle
• Use cable ties to support air pipe and sensor cable connections. Secure the connectors to existing
cables where possible
• Ensure that cable to cable connections are well supported
• Avoid running cables on or near sharp objects
• Keep cables away from hot components such as exhausts and engines
Use cable protector to protect the cable at positions where it may be exposed to damage
• Use cable ties to secure any excess cable to the chassis of the vehicle
Ensure that you make a note of the serial number of the sensor and the location on the vehicle
where it is installed.
10. Make a note of the serial number of the sensor and the position it is located on the vehicle, e.g. SN:
xxxx, rear left air circuit etc.
It is recommended that you use the system configuration table to record this information. See
“System configuration table” on page 116
TruckWeigh
®