VPG TruckWeigh, Руководство по установке, настройке и калибровке

Страница: 37 / 130

37
How to install the display unit
A single display unit is installed in the cab of the vehicle to display the sensor information. It is connected
to each junction box mounted on the vehicle and trailers via the external domain cable.
The junction box has two ports. These are keyed to ensure that only the correct cables can be connected
to the correct port:
• A type key (Grey port). This is the connection for the internal domain cable.
• B type key (Black port). This is the connection for the external domain cable. Information is
transmitted from the junction box to the display unit via this port.
The external domain cable starts at the junction box
and routed to the cab of the vehicle.
1. Connect the black plug on the external domain
cable to the black port on the junction box
2. Route the external domain cable to the location
for the display unit in the cab of the vehicle
• Avoid running cables on or near sharp objects
• Keep cables away from hot components such as exhausts and engines
Use cable protector to protect the cable at positions where it may be exposed to damage
It is recommended that you follow existing cable routes and ensure that the cable is able to plug
into the rear of the display unit after it has been mounted
3. Route the power cable from the location of the display unit in the cab to the appropriate connection
point for the power supply in the vehicle
TruckWeigh
®
TruckWeigh®