VPG TruckWeigh, Руководство по установке, настройке и калибровке

Страница: 30 / 130

30
Axle transducer on a rear rubber bogie
Select a position to install the transducer on a rear rubber bogie where:
• The transducer is mounted on the torque
arm. This can be the top side, left or right
side or under side of the arm
• The transducer is parallel to the orientation
of the chassis
• The transducer is as close as possible to
the axle with the internal domain cable
running away from the axle
• The transducer is not at risk of damage
from any part on the vehicle throughout
the full range of movement of the arm
• The internal domain cable can be routed and connected without risk of damage from any moving
parts and allowing for the full range of movement of the transducer on the arm
When mounting the sensor, ensure it is in the correct orientation, with the groove at the top. See
“How to install a steel axle transducer” on page 35 for further guidance
TruckWeigh
®