VPG TruckWeigh, Руководство по установке, настройке и калибровке, Страница: 81 / 130

81
4. Select the position for the sensor:
• Use the scroll up and down buttons to highlight the position field and tap the select button to
open it.
• Use the scroll up and down buttons to select a position number and tap the back button to
return
The position number is the position of the sensor on the vehicle. Number 1 is the sensor on the
front axle, this is the sensor on the left side of the axle if it is not an air group, 2 is the sensor on the
right. 3 is the sensor on the left side of the second axle etc. See “Sensor installation positions” on
page 26 for more information.
5. Select the direction for each axle sensor:
• Use the scroll up and down buttons to highlight the direction field and tap the select button to
open it.
• Use the scroll up
and down buttons
to select a direction,
e.g. facing forward,
facing backward
• Tap the back button
to return
6. Repeat steps 3 to 5 to ensure each sensor is configured correctly. For example:
In the example above, the sensor with serial number 99999999 is installed on the right hand side of the
first axle, with the front face of the sensor pointing toward the front of the vehicle.
7. Tap the back button to exit the sensor configuration menu return to the vehicle config menu
8. Tap the yes button to save the sensor configuration
Cable attatched to the
rear of transducer
Front of the vehicle
Sensor Facing Forward
A G
A G
A G
A G
Sensor
Position
Direction
SN 9999999
2
Forward
Type: Axle
(2-4)
TruckWeigh
®
TruckWeigh®