VPG TruckWeigh, Руководство по установке, настройке и калибровке

Страница: 7 / 130

7
Important installation information
To ensure a reliable and properly functioning system particular importance should be paid to the
following:
• TruckWeigh® axle transducer installation. A suitable location for the transducer should be carefully
identified and that location should then be prepared for the transducer to be attached. See “How to
install a steel axle transducer” on page 35
• TruckWeigh® axle transducer orientation. Axle transducers must be mounted to the vehicle with the
correct orientation. See “How to install a steel axle transducer” on page 35
• Accurate recording of sensor serial numbers in their sensor positions. It is recommended that you use
the system configuration table to record this information and refer to it when you are configuring the
system. See “System configuration table” on page 116
TruckWeigh
®
TruckWeigh®