VOTI XR3D-6, Техническое обслуживание и устранение неисправностей

Страница: 23 / 94

XR3D-6 Maintenance & Troubleshooting
EM-XR3D-6-001-EN.D 3-3
©2011 VOTI Inc.
Field Description
Runs the conveyor in a forward direction.
Start the X-ray simulation.
Toggles the conveyor speed fast or slow. In the Risk Assessment
module, the conveyor speed is set for the different levels. The speed
can be fast or slow. The SPEED button allows the speed to be
manually set for testing purposes.
Outputs Contains the binary value and a colour display for the state of the
output.

Motor ON/OFF is for the Conveyor Motor.

Motor Direction is for the Forward or Reverse direction of the
conveyor.

Green Lights is for the lights on top of the scanner.

X-Ray On/Off is for the X-ray generator.

Speed is for the selected speed of the conveyor.

Red Lights is for the lights on top of the scanner during a scan.

Spare
– Not Used.
Inputs Contains the binary value and a colour display for the state of the
input.

EC1 is for the Photo Sensor Transmitter 1 (tunnel entrance).

EC2 is for the Photo Sensor Transmitter 2 (tunnel exit).

Door Interlock is for the Interlock switches on the base access
panels.

Keylock is for the Operator Key switch.

Floor mat is for the optional floor mat.

Emergency Stop is for the Emergency Stop switches.

Spare
– Not Used.
Advanced Operations N. Valid Commands:
N. Valid Commands:
N. Invalid checksum:
N. Overrun error bit:
N. Bad Commands:
/
USB ON or USB OFF
Test
Statistics
Clear
To perform a check of the outputs and inputs, proceed as follows:
1. Click on FWD button ( ).