Vivotek AW-GEV-264A Series, Руководство пользователя

Страница: 296 / 334

User Manual rev. 1.2. Aug. 2015
296

Surveillance Software Version:
Displays the current surveillance firmware version number.

Total Device:
Displays the number of devices in your topology.

MAC Address:
The MAC Address of this switch.

IPv4 DHCP State:
The current DHCP status showing whether the DHCP client status is enabled.

Current IPv4 Address:
The current address (IPv4). Surveillance uses switch interface VLAN1 as default.

Surveillance Working Status:
The current switch working condition.

System Date: The current system date and time zone.

System Uptime: How long has the system been operating.

Surveillance State: Displays whether the Surveillance mode has been activated, see
previous pages for details.

Device Scan Range: See previous pages for details.

Device Scan Starting IP Address: In the Manual mode, enter a starting address for
the address scan, e.g., 192.168.1.1.

Device Scan Ending IP Address: In the Manual mode, enter an end address for the
address scan, e.g., 192.168.4.254.

QoS Enable: Select to enable or disable the QoS setting for mission-critical video.

QoS Class: Select the priority for the QoS setting. #7 has the highest priority.

IP Setting:

IPv4 DHCP Enable:
Enables the DHCP client mode setting for listening to a DHCP server in the local
network.

IPv4 Address:
The IPv4 address of the interface VLAN1.

Subnet mask:
The IPv4 network mask of the interface VLAN1.

DNS Server:
Select the source of DNS service.
1. From any DHCP interfaces: as provided by a router offering the DHCP service.
2. No DNS server.
3. Configured: User defined.
4. From this DHCP interface: If a router exists in a specific VLAN configuration, listen
to the particular router for the DNS service.

DNS Proxy:
Select this checkbox if access to the DNS server is made via a Proxy.