Vivotek AW-GEV-264A Series, Руководство пользователя

Страница: 149 / 334

User Manual rev. 1.2. Aug. 2015
149

Upper right icon (Refresh):
You can click them for refresh the Protocol Group Mapping information by manual.
3-15.3 IP Subnet-based VLAN
The IP subnet-based VLAN entries can be configured here. This page allows for adding,
updating and deleting IP subnet-based VLAN entries and assigning the entries to different
ports. This page shows only static entries.
Web Interface
To Display IP subnet-based VLAN Membership to configured in the web interface:
1. Click VCL, Group Name VLAN configuration and add new entry.
2. Specify the VCE ID, IP Address, Mask Length, VLAN ID and select Port Members.
3. Click Apply.
Figure 2-15.3: IP Subnet-based VLAN Membership Configuration
Parameter description:

Delete
To delete a IP subnet-based VLAN entry, check this box and press save. The entry will be
deleted on the selected switch in the stack.

VCE ID
Indicates the index of the entry. It is user configurable. It's value ranges from 0-128. If a VCE
ID is 0, application will auto-generate the VCE ID for that entry. Deletion and lookup of IP
subnet-based VLAN are based on VCE ID.

IP Address
Indicates the IP address.

Mask Length
Indicates the network mask length.

VLAN ID
Indicates the VLAN ID. VLAN ID can be changed for the existing entries.

Port Members
A row of check boxes for each port is displayed for each IP subnet-based VLAN entry. To
include a port in a IP subnet-based VLAN, check the box. To remove or exclude the port
from the IP subnet-based VLAN, make sure the box is unchecked. By default, no ports are
members, and all boxes are unchecked.

Adding a New IP subnet-based VLAN
Click “Add New Entry” to add a new IP subnet-based VLAN entry. An empty row is added to