User Manual rev. 1.2. Aug. 2015
319
Figure 8-1.1: Topology View
See below for the sample screen and mouse control:
You can also configure VLAN grouping in the Topology View. To configure grouping, proceed with the
following:
1.
Enable the Grouping mode by selecting the “Group” check circle from Device List
menu. Check circles will appear in front of every IP cameras. When configuring a
new group, select New Group from the drop-down list. When configuring an
existing group, select an existing group.
2.
Select the members you prefer from the topology. Select by checking their
circles.
3.
Enter a Group name, Description, and a unique VLAN ID. See the previous
chapter for details.
VLAN ID is the VLAN identifier (VID) for the port as defined in
IEEE 802.1Q-2003. A value of 1 through 4094 is used to define a valid VLAN ID. A
value of 0 (Priority Tagged) is used if the device is using priority tagged frames as
defined by IEEE 802.1Q-2003, meaning that only the IEEE 802.1D priority level is
significant and the default PVID of the ingress port is used instead.
4.
When done, click the Apply button for the configuration to take effect. Click the
Save button
to save your configuration.
Figure 8-1.2: Configuring Grouping in the Topology View
Содержание AW-GEV-264A Series
