User Manual rev. 1.2. Aug. 2015
79
3
-5.2.3.2 Rate Limiters
The section describes how to configure the switch
’s ACL Rate Limiter parameters. The Rate
Limiter Level from 1 to 16 that allow user to set rate limiter value and units with pps or kbps.
Web Interface
To configure ACL Rate Limiter in the web interface:
1. Click Configuration, ACL, then Rate Limiter
2. To specific the Rate field and the range from 0 to 3276700.
3. To scroll the Unit with pps or kbps
4. Click the Apply to save the setting
5. If you want to cancel the setting then you need to click the reset button. It will revert to
previously saved values.
Figure 3-5.2.3.2: The ACL Rate Limiter Configuration
Parameter description:
Rate Limiter ID :
The rate limiter ID for the settings contained in the same row.
Rate
The allowed values are: 0-3276700 in pps or 0, 100, 200, 300, ..., 1000000 in
kbps.
Unit :
Specify the rate unit. The allowed values are:
pps:
packets per second.
kbps:
Kbits per second.
Buttons
Apply
– Click to save changes.
Содержание AW-GEV-264A Series
