User Manual rev. 1.2. Aug. 2015
178
Indicates the type of frame to look for incomming frames. Possible frame types are:
Any:
The QCE will match all frame type.
Ethernet:
Only Ethernet frames (with Ether Type 0x600-0xFFFF) are allowed.
LLC:
Only (LLC) frames are allowed.
SNAP:
Only (SNAP) frames are allowed
IPv4:
The QCE will match only IPV4 frames.
IPv6:
The QCE will match only IPV6 frames.
Action :
Indicates the classification action taken on ingress frame if parameters configured are
matched with the frame's content.
There are three action fields: Class, DPL and DSCP.
Class:
Classified QoS Class; if a frame matches the QCE it will be put in the queue.
DPL:
Drop Precedence Level; if a frame matches the QCE then DP level will set to value
displayed under DPL column.
DSCP:
If a frame matches the QCE then DSCP will be classified with the value displayed
under DSCP column.
Modification Buttons :
You can modify each QCE (QoS Control Entry) in the table using the following buttons:
: Inserts a new QCE before the current row.
:
Edits the QCE.
: Moves the QCE up the list.
: Moves the QCE down the list.
: Deletes the QCE.
: The lowest plus sign adds a new entry at the bottom of the QCE listings.
Port Members :
Check the checkbox button in case you what to make any port member of the QCL entry. By
default all ports will be checked
Key Parameters :
Key configuration are discribed as below:
Tag Value of Tag field can be 'Any', 'Untag' or 'Tag'
VID Valid value of VLAN ID can be any value in the range 1-4095 or 'Any'; user can enter
either a specific value or a range of VIDs
PCP Priority Code Point: Valid value PCP are specific(0, 1, 2, 3, 4, 5, 6, 7) or range(0-1, 2-3,
4-5, 6-7, 0-3, 4-7) or 'Any'
DEI Drop Eligible Indicator: Valid value of DEI can be any of values between 0, 1 or 'Any'
SMAC Source MAC address: 24 MS bits (OUI) or 'Any'
DMAC Type Destination MAC type: possible values are unicast(UC), multicast(MC),
broadcast(BC) or 'Any'
Frame Type Frame Type can have any of the following values
1. Any
2. Ethernet
3. LLC
4. SNAP
5. IPv4
Содержание AW-GEV-264A Series
