User Manual rev. 1.2. Aug. 2015
87
3-5.2.5 ARP Inspection
The section describes to configure the ARP Inspection parameters of the switch. You could
use the ARP Inspection configure to manage the ARP table.
3-5.2.5.1 Configuration
This section describes how to configure ARP Inspection setting including
:
Mode (Enabled and Disabled)
Port (Enabled and Disabled)
Web Interface
To configure an ARP Inspection Configuration in the web interface:
1. Select
“Enabled” in the Mode of ARP Inspection Configuration.
2. Select
“Enabled” of the specific port in the Mode of Port Mode Configuration.
3. Click Apply.
Figure 3-4.2.6.1: The ARP Inspection Configuration
Parameter description:
Mode of ARP Inspection Configuration :
Enable the Global ARP Inspection or disable the Global ARP Inspection.
Port Mode Configuration :
Specify ARP Inspection is enabled on which ports. Only when both Global Mode and Port
Mode on a given port are enabled, ARP Inspection is enabled on this given port. Possible
modes are:
Enabled:
Enable ARP Inspection operation.
Disabled:
Disable ARP Inspection operation.
If you want to inspect the VLAN configuration, you have to enable the setting of "Check
Содержание AW-GEV-264A Series
