Vivotek AW-GEV-264A Series, Руководство пользователя

Страница: 274 / 334

User Manual rev. 1.2. Aug. 2015
274
4-14.2.2 Group to VLAN
This page shows you the configured Group Name to a VLAN for the switch .
Web Interface
To Display Group to VLAN configuration in the web interface:
1. Click Monitor, VCL, Group to VLAN.
2.
Checked “Auto-refresh”.
3. Click
“Refresh“ to refresh the port detailed statistics.
Figure 4-14.2: The MAC-based VLAN Membership Status for User Static
Parameter description:

Group Name :
A valid Group Name is a string at the most 16 characters which consists of a combination of
alphabets (a-z or A-Z) and integers(0-9), no special character is allowed. whichever Group
name you try map to a VLAN must be present in Protocol to Group mapping table and must
not be pre-used by any other existing mapping entry on this page.

VLAN ID :
Indicates the ID to which Group Name will be mapped. A valid VLAN ID ranges from 1-4095.

Port Members :
A row of check boxes for each port is displayed for each Group Name to VLAN ID mapping.
To include a port in a mapping, check the box. To remove or exclude the port from the
mapping, make sure the box is unchecked. By default, no ports are members, and all boxes
are unchecked.

Buttons
Auto-refresh: Check this box to refresh the page automatically. Automatic
refresh occurs every 3 seconds.
Refresh: Click to refresh the page.