User Manual rev. 1.2. Aug. 2015
179
6. IPv6
NOTE: All frame types are explained below:
1. Any :
Allow all types of frames.
2. Ethernet :
Ethernet Type Valid ethernet type can have value within
0x600-0xFFFF or 'Any', default value is 'Any'.
3. LLC:
SSAP Address Valid SSAP(Source Service Access Point)
can vary from 0x00 to 0xFF or 'Any', the default value is 'Any'
DSAP Address Valid DSAP(Destination Service Access Point) can
vary from 0x00 to 0xFF or 'Any', the default value is 'Any'
Control Address Valid Control Address can vary from 0x00 to 0xFF or
'Any', the default value is 'Any'
4. SNAP :
PID Valid PID(a.k.a ethernet type) can have value within
0x00-0xFFFF or 'Any', default value is 'Any'
5. IPv4 :
Protocol IP protocol number: (0-255, TCP or UDP) or 'Any'
Source IP Specific Source IP address in value/mask format or 'Any'.
IP and Mask are in the format x.y.z.w where x, y, z, and w are decimal
numbers between 0 and 255. When Mask is converted to a 32-bit
binary string and read from left to right, all bits following the first zero
must also be zero DSCP Diffserv Code Point value(DSCP): It can be
specific value, range of value or 'Any'. DSCP values are in the range
0-63 including BE, CS1-CS7, EF or AF11-AF43
IP Fragment IPv4 frame fragmented option: yes|no|any
Sport Source TCP/UDP port:(0-65535) or 'Any', specific or port range
applicable for IP protocol UDP/TCP
Dport Destination TCP/UDP port:(0-65535) or 'Any', specific or port
range applicable for IP protocol UDP/TCP
6. IPv6 :
Protocol IP protocol number: (0-255, TCP or UDP) or 'Any'
Source IP IPv6 source address: (a.b.c.d) or 'Any', 32 LS bits
DSCP Diffserv Code Point value(DSCP): It can be specific value,
range of value or 'Any'. DSCP values are in the range 0-63 including
BE, CS1-CS7, EF or AF11-AF43
Sport Source TCP/UDP port:(0-65535) or 'Any', specific or port range
applicable for IP protocol UDP/TCP
Dport Destination TCP/UDP port:(0-65535) or 'Any', specific or port
range applicable for IP protocol UDP/TCP
Содержание AW-GEV-264A Series
