User Manual rev. 1.2. Aug. 2015
129
of power the PD may use, it must be defined what amount of power the primary and backup
power sources can deliver.
Valid values are in the range 0 to 2000 Watts.
Port :
This is the logical port number for this row.
Ports that are not PoE-capable are grayed out and thus impossible to configure PoE for.
PoE Mode :
The PoE Mode represents the PoE operating mode for the port.
Disabled
: PoE disabled for the port.
PoE
: Enables PoE IEEE 802.3af (Class 4 PDs limited to 15.4W)
PoE+
: Enables PoE+ IEEE 802.3at (Class 4 PDs limited to 30W)
Priority :
The Priority represents the ports priority. There are three levels of power priority named Low,
High and Critical.
The priority is used in the case where the remote devices requires more power than the
power supply can deliver. In this case the port with the lowest priority will be turn off starting
from the port with the highest port number.
Maximum Power :
The Maximum Power value contains a numerical value that indicates the maximum power
in watts that can be delivered to a remote device.
The maximum allowed value is 30 W.
Содержание AW-GEV-264A Series
