Vivotek AW-GEV-264A Series, Руководство пользователя

Страница: 130 / 334

User Manual rev. 1.2. Aug. 2015
130
3- 11.2 Power Delay
This page allows the user to setting the delay time of power providing after device rebooted.
Web Interface
To Display Power Over Ethernet Status in the web interface:
1. Click Configuration, PoE, and Power delay.
2. Enable the port to the power device.
3. Specify the power providing delay time when reboot.
4. Click Apply to apply the change.
Figure 3-11.2: The PoE Power Delay
Parameter description:
Power Supply Configuration

Port :
This is the logical port number for this row.

Delay Mode :
Turn on / off the power delay function.
Enabled : Enable POE Power Delay.
Disabled : Disable POE Power Delay.

Delay Time(0~300sec) :
When rebooting, the PoE port will start to provide power to the PD when it out of delay time.
default: 0, range: 0-300 sec.