Vitek VT-TNR1646PF, Руководство пользователя

Страница: 79 / 186

VITEK Industrial Video Products – Transcendent Series NVRs
69
7.4.2 Storage Mode Configuration
Click Start
à
Settings
à
Disk
à
Storage Mode to go to the interface as shown below.
For example, there are four disk groups. By using disk group, you can correspond the camera to
disk (the record data of the camera in the group will be stored into the disks in the same group).
The NVR with e-SATA interface supports e-SATA recording.
The added disks and cameras will be added into group one automatically. The disks and cameras
in the groups can be deleted except group one (select a disk group and then click
on the
top right corner of the added disk or camera to delete it from the group). The deleted disks and
cameras will be moved into group one automatically.
Each group can add the disks and cameras from other groups. Each disk and camera can only be
added into one group. Select a disk group and then click
in the disk or camera row to
pop up a window. Check the disks or cameras in the window and then click “Add”.
For the model with 2 or 4 HDD slots, BK group can be added as shown below.
VITEK Industrial Video Products – Transcendent Series NVRs
70
Click to add the backup HDD. After account verification, select a HDD and then this
HDD will be removed from the normal group to the backup group. Simultaneously, it will be
formatted. Please back up all data of this HDD in advance when you want to move it to the
backup group.
You can add cameras to this HDD. The added cameras can exist and be recorded both in one
HDD of the normal group and the backup group.
Note : Each HDD only can exist in one group.
7.4.3 View Disk and S.M.A.R.T. Information
Click Start
à
Settings
à
Disk
à
View Disk Information to view the HDD information; click
“S.M.A.R.T. Information” to view the working status of the HDD. Refer to the picture below.