VITEK Industrial Video Products – Transcendent Series NVRs
105
them, please skip the following instructions.
The setting steps are as follow:
①
Enable face detection function (see 9.1.1 Face Detection Settings for details).
②
Enable face recognition function and set the alarm linkage items (see 9.1.3 Face Recognition
Settings for details).
③
Go to live view interface and click on a face detection channel. This will bring a toolbar
under the channel. Then click
to go to the target detection interface of this channel. In this
interface, you can switch the channel on the top right. You can also click
on the top right
corner of the live view interface and then choose the target detection tab to go to the target
detection interface of multi-channel as shown below.
For unknown faces, you can select the face and click under the captured face to register
this face (see the following picture); click
to quickly go to the smart face search interface
where you can search the matching face information; click to quickly go to the smart face
playback interface; click
to view snapshot details.
VITEK Industrial Video Products – Transcendent Series NVRs
106
Before registering target face pictures, please add groups for them in advance (see 9.1.2 Face
Database Management for details).
After the face pictures are registered, the system will compare them automatically once the
corresponding faces are captured next time. Refer to the following picture.
Содержание VT-TNR1646PF
Страница 185: ...NOTES ...
