Vitek VT-TNR1646PF, Руководство пользователя

Страница: 63 / 186

VITEK Industrial Video Products – Transcendent Series NVRs
53
Ø
Cruise Group Settings
On the right panel, click to go to the cruise group setting tab. Click “Add” to add a cruise
group as shown below.
In the “Add Cruise” window, select the cruise line name. After that, click “Play” to play the
cruise lines in sequence.
Ø
Trace Settings
On the right panel, click to go to the trace setting tab. Click “Add” to add the trace name.
Then click “OK” to save this name. Please refer to the following picture.
After that, click “Start Record” to record the trace. Then click “Stop Record” to finish recording.
Click
to play the recorded trace. Click to delete the trace.
VITEK Industrial Video Products – Transcendent Series NVRs
54
6.2 Preset Settings
Click Start
à
Settings
à
Camera
à
PTZ
à
Preset to go to the interface as shown below.
Ø
Add preset
Select camera and then click “Add” to add preset; or click in the camera list on the right
side of the interface to display the preset information of the dome and then click to
add preset. The operations of the “Add Preset” window are similar to that of the PTZ control
interface; please see 6.1 PTZ Control Interface Introduction for details.
Ø
Edit preset
Select camera and preset. You can enter a new name of the preset and then click to save
the new preset name. Adjust the rotating speed, position, zoom, focus and iris of the preset and
then click “Save Position” to save the preset.
Ø
Delete Preset
Select camera and preset and then click “Delete” to delete the preset.
6.3 Cruise Settings
Click Start
à
Settings
à
Camera
à
PTZ
à
Cruise to go to the interface as shown below.