Vitek VT-3600, Инструкция по эксплуатации

Страница: 5 / 40

ENGLISH
• To avoid obstructions do not apply excessive force
while pushing meat with the pusher (1).
• If any hard piece of food stops the feeder screw
or cutting blade rotation, switch the unit o ff im ­
mediately and use the screw reverse mode «REV»
(reverse) to remove the obstruction before start­
ing again.
BEFORE USING THE MEAT GRINDER
A fter unit transportation or storage at low te m p e ra ­
ture it is necessary to keep it fo r at least tw o hours
at room tem p erature before switching on.
• Unpack the meat grinder and remove all package
materials, clean the unit body with a damp cloth and
then wipe it dry.
• Wash all removable parts with warm w ater and neu­
tral detergent, then rinse and dry thoroughly before
assembling.
• Before using the unit for the first time, make sure
that voltage in your mains corresponds to the op er­
ating voltage of the unit.
USING THE MEAT GRINDER
• The meat grinder is intended only fo r household
processing products and making homemade semi­
finished products.
• Assemble the unit and place it on a fla t dry surface.
• Make sure that ventilation openings on the body are
not blocked.
• Insert the power plug into the mains socket, the but­
ton (11) « © » illumination will light up.
• Place a suitable bowl under the meat grinder head
(3).
• Make sure that the meat is fully defrosted, re­
move excess fat and all bones, and cut the meat
into cubes or strips fitting the opening of the food
tray (2).
• Switch the unit on by pressing the button (11) © » .
• Slowly feed the meat pieces into the grinder head
body (3) using the pusher (1).
• During operation use only the pusher (1) supplied
with the unit.
• Do not use any other objects to push products; do
not push the meat with your hands.
• Do not apply excessive e ffort while pushing the
meat o r other food.
• O bstructions can appear during grinding m eat or
other products, use the screw reverse mode «REV»
to remove the obstruction. To switch the screw re­
verse mode «REV» on, switch the meat grin der o ff
by pressing the button (11) « © » , then press the
button (10) « © » , the illumination o f this button will
light up, and then switch the unit on by pressing the
button (11) « © » .
• Do not run the unit fo r more than 5 minutes con­
tinuously.
• A fter 5 minutes of continuous use, switch the meat
grinder o ff and let it cool down during 10-15 minutes
before further operation.
• A fter you finish operating, switch the m eat grinder
off, pressing the button (11) « © » , unplug the unit,
and only after that you can disassemble it.
MEAT GRINDING
1. Install the meat grinder head (3) to the attaching
point (4), and turn it counterclockwise until bum p­
ing (pic. 1, 2).
2. Install the screw (12) into the meat grinder head (3)
body (pic. 3).
3. Install the crossed blade (13) (pic. 4).
4. Select one of the grates (14 or 15) and set it above
the blade, m atching the ledges on the grate with the
grooves on the meat grinder head body (3), tighten
the nut (16) (pic. 5, 6).
A ttention!
- Face the blade cutting side to the grate. I f the
blade is in stalled im properly, it will n o t grind
the products.
- Coarse grate (1 4) is in ten d ed fo r processing
ra w m eat, vegetables, d ried fruit, cheese, fish,
etc.
- Fine grate (1 5) is in ten d ed fo r processing both
ra w a n d co oked m eat, fish, etc.
5. Place the food tray (2) on the meat grinder head
body (3).
6. Insert the power plug into the mains socket, the but­
ton (11) « © » illumination w ill light up.
7. Switch the m eat grin der on by pressing the button
(11) « © » .
8. During the operation use only the pusher (1).
N ote:
- For b e tte r m e a t processing slice it in cubes o r
stripes. D efrost frozen m e a t thoroughly.
- D uring the operation use on ly the pu sh e r supplied
with the unit; do n o t use any o th er o bjects to push
the m eat; never push the m e a t with yo u r fingers.
9. A fter you finish operating, switch the m eat grinder
off, pressing the button (11) « © » , and unplug the
unit; after that you can disassemble it.
10. To remove the meat grinder head press the lock
button (5), turn the meat g rinder head (3) clockwise
and remove it.
11. To disassemble the meat grinder head, unscrew
the nut (16) and take out the installed grate (14 or
15), the blade (13) and the screw (12) from the meat
grinder head body.
AUTO S WITCH-OFF FUNCTION
The meat grinder is equipped with auto sw itch-off fun c­
tion in case of m otor unit overheating.
•
In case of overheating of the motor, the automatic
thermal switch will be on, and the meat grinder will
be switched off.
• In this case im m ediately remove the power plug
from the mains socket.
5